Home »

Gm ecotec engine

The meaning of «gm ecotec engine»

The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.4 and 2.5 litres. While these engines were based on the GM Family II engine, the architecture was substantially re-engineered for the new Ecotec application produced since 2000. This engine family replaced the GM Family II engine, the GM 122 engine, the Saab H engine, and the Quad 4 engine. It is manufactured in multiple locations, to include Spring Hill Manufacturing, in Spring Hill, Tennessee.

The 'Ecotec' name was adopted in 1994 for the new generation of Family II engines (2000 in North America) . The name was already used for the Opel GM Family II engine, Family 1 and Family 0 ranges. GM intends this new Ecotec to become its global 4-cylinder, and it has already fully replaced their OHV I4 line.

The Ecotec engine is a DOHC 4-valve design with a lost foam cast aluminum block and head (L850 for 86 mm bore applications, and L880 for 88 mm bore[citation needed]), designed for displacements from 1.8 to 2.4 L. Development began in 1994, by an international team of engineers and technicians from Opel's International Technical Development Center in Rüsselsheim, Germany, GM Powertrain in Pontiac, Michigan, and Saab in Södertälje, Sweden.[2] Much of the development work on this project was carried out by Lotus Engineering, Hethel, United Kingdom. The engine uses aluminum pistons and cast iron cylinder liners. Vibration is reduced with twin balance shafts.

The first engine in the Ecotec Gen I line-up was Ecotec 2.2 L61, introduced in 2000.

The current Ecotec line is manufactured in Tonawanda, New York,.[2]

This engine is also known as B207 when used by Saab and Z20NET by Opel for use in the Vectra C and Signum.

LK9 is a turbocharged 2.0 L— 1,998 cc (121.9 cu in)—version of the L850 (86 mm bore) series Ecotec utilizing an all-new reinforced sand cast aluminum cylinder head and upgraded internal components. The engine features a five-bearing forged steel crankshaft, strengthened connecting rods, redesigned pistons, piston oil cooling jets, reprofiled camshafts and an integrated oil cooler[3]. The exhaust valves are liquid sodium-cooled. All vehicles using this engine feature Saab's Trionic 8 (T8) engine management system as well as a revised valve train. The timing chain and timing gears are also new, along with Saab's Direct Ignition system. The reinforcements, turbocharging, intercooling, internals, dual overhead camshaft, and such were developed by GM Powertrain Sweden (Saab Automobile Powertrain). It features an 86 millimetres (3.4 in) bore and stroke and a 9.5:1 compression ratio. Maximum power is 210 horsepower (160 kW) at 5300 rpm and 221 ft⋅lb (300 N⋅m) of torque at 2500 rpm. Maximum boost is 12.3 psi (0.85 bar).

The LSJ is a supercharged version of the LK9 Ecotec 2.0 L— 1,998 cc (121.9 cu in)— with an Eaton M62 Roots-type supercharger and air-to-liquid intercooler. The LSJ shares many of its components with the LK9 such as: piston cooling jets, oil cooler, pistons, connecting rods, crankshaft, oil pan, sodium-filled exhaust valves and cylinder head.[4] It is rated at 205 hp (153 kW) at 5600 rpm and 200 ft⋅lb (271 N⋅m) at 4400 rpm with a compression ratio of 9.5:1 and a 6450 rpm redline. With the end of the Chevy Cobalt S/C SS and Saturn Ion Red Line, the LSJ was discontinued after 2007. In late 2005 Brammo Motorsports struck a deal with GM for the Supercharged 2.0 L Ecotec for their Ariel Atom. The engine came in various ratings from 205 hp (153 kW) to 300 hp (220 kW).

© 2015-2020, Wikiwordbook.info
Copying information without reference to the source is prohibited!
contact us mobile version