PDF download Download Article PDF download Download Article

A digital multimeter is a super handy tool for quickly measuring voltage, resistance, continuity, and current in many types of electrical circuits. It’s really easy to use a digital multimeter once you understand what the various symbols on the dial stand for. Soon enough, you’ll be testing all kinds of electronics with your digital multimeter!

Method 1
Method 1 of 4:

Measuring Voltage

PDF download Download Article
  1. Always plug the black test lead into the terminal that’s labeled “COM” for “Common.” Always plug the red test lead into the terminal labeled “V” for “Voltage,” since this is what you’re testing.[1]
    • Both AC and DC voltage are measured using the test leads in this setting.
  2. Turn the dial to V~, or the V with a wave sign next to it, if you’re measuring AC voltage. Switch the dial to V⎓, or the V with a horizontal line next to it, to measure DC voltage.[2]
    • AC, or alternating current, voltage is used to measure things you might find around the house, like wall sockets, microwaves, and other home electrical appliances.
    • DC, or direct current, voltage is mostly used to measure batteries. DC voltage is also used in cars and many small electronics.
    Advertisement
  3. If you set the voltage range too low, you won’t get an accurate reading. Look at the numbers on the dial and choose the setting that’s closest to the expected voltage of what you’re measuring, while still being above that voltage.[3]
    • For example, if you’re measuring a 12V battery and there are settings for 2V and 20V on your multimeter, set the dial to 20V.
    • If you don’t know the voltage of what you’re reading, just set the multimeter to its highest voltage rating.
  4. Put the tip of the black probe on the negative lead of a battery or into the right side of a wall socket, for example. Put the red probe on the positive end of a battery or into the positive side of a wall socket, for instance.[4]
    • If you’re not sure which end is positive and which is negative, try putting a probe on each end and seeing what the multimeter says. If it’s showing a negative number, your positive and negative are switched.
    • To avoid getting shocked, keep your fingers away from the tips of the probes when you’re putting them near a wall socket.
    • Keep the probes from coming into contact with one another or you can generate a short circuit and possibly cause an electrical fire.
    • Always hold the probes by the colored handles, which are insulated to prevent shock.
  5. Once your probes are connected to the positive and negative leads, you’ll get a reading on the multimeter telling you the voltage of what you’re testing. Look at the digital screen to find the reading and take note of it if desired.[5]
    • Looking at your reading tells you whether or not the voltage you're measuring is average or not. For example, if you measure the wall socket and the multimeter reads 100V, this is below the average of 120V, letting you know this wall socket's voltage is low.
    • If you’re checking the voltage of a new 12V battery, the reading should be right around 12V. If it is lower or there is no reading at all, the battery is low or dead.
  6. Advertisement
Method 2
Method 2 of 4:

Testing Current

PDF download Download Article
  1. Insert the black plug into the COM terminal. Put the red plug into amps or milliamps, labeled with A or mA, depending on the amperage of what you’re measuring current of. Locate the Amps setting and turn the multimeter's dial to it.[6]
    • Your multimeter likely has two terminals for amps: 1 for currents up to 10 amps (10A) and 1 that measures up to roughly 300 milliamps (300mA). If you’re not sure of the range of amperage you’re measuring, place your red plug in the amps terminal.
    • You can always switch to milliamps for a more precise reading if necessary.
    • Some multimeters have two As, 1 for alternating current (used for residential power and represented by the wave sign) and 1 for direct current (used in batteries and wires and represented by a horizontal line with a dotted line under it). Direct current is the 1 that's most used for this reading.
  2. This allows you to use your multimeter as an ammeter to complete the circuit and measure the current. Unplug or otherwise remove a wire from the terminals it’s connected to on 1 side of the circuit, leaving the other wire connected to its terminals.[7]
    • It doesn’t matter which side of the circuit you disconnect. The point is just to make a space to splice your multimeter into the circuit, so it can act as an ammeter and tell you how much current is flowing through the circuit.
    • "Splicing in the multimeter" means that you're connecting the multimeter to the current going directly through the wires.
  3. Connect 1 probe to each of the terminals you just disconnected the wire from to splice it into the circuit. Read the screen to determine how much current is flowing through the circuit.[8]
    • It doesn’t matter which probe you touch to which side of the circuit. Your multimeter will give you a reading either way.
    • You can troubleshoot electrical circuits by splicing your multimeter into different sections of them. If 1 section gives you a lower current reading, it might mean there is a bad wire that’s inhibiting electrical flow.
    • If you initially test amps and you get a really low reading, such as 1, switch to testing milliamps to get a more precise reading.
  4. Advertisement
Method 3
Method 3 of 4:

Measuring Resistance

PDF download Download Article
  1. Stick the black test lead’s plug into the COM terminal. The red test lead’s plug goes into the terminal labeled Ω, which is the symbol for ohms, the unit that resistance is measured in.[9]
    • The Ω sign is likely linked with the V sign, meaning the terminal to measure ohms and voltage is the same.
  2. Look for the Ω symbol on your multimeter’s dial area. Twist the dial to a number close to the expected resistance in this section. If you aren’t sure what the expected resistance is, set it to a number at the top of the scale. You can adjust it as you measure until you get a precise reading.[10]
    • Resistance is the opposition to flow of current in an electrical circuit. Conductive materials like metal have low resistance, while non-conductive materials like wood have high resistance.
    • For example, if you’re measuring the resistance of a wire, set the dial to just above 0. You can look up the expected resistance for different electrical components online or in an owner’s manual.
    • The Ω values on your multimeter can range from 200 to 2 million ohms, depending on the specific type of multimeter you have.
  3. Touch the tips of the probes onto each end of the resistor. Look at the multimeter’s digital screen to see the reading, which tells you the amount of resistance in ohms.[11]
    • If your multimeter is just reading “1,” you might need to increase the value of ohms measured by turning the dial so your reading is more specific.
    • Write down the reading if needed, noting the correct unit.
  4. Advertisement
Method 4
Method 4 of 4:

Testing Continuity

PDF download Download Article
  1. If the device is still being powered, you can’t test for continuity. Make sure it is disconnected from all power sources before you proceed.[12]
    • The continuity option on your multimeter is for testing whether wires are still working or not. If you’re not sure whether a certain cord or wire still has a good connection, you can test this by measuring its continuity. This tests the connection between two points in a circuit.
    • Continuity is the presence of a complete path of electrical flow. For example, a brand new electrical wire should have full continuity. However, if it is frayed or broken, it doesn’t have continuity because the electricity cannot flow through it.
    • This is a good way to see if cables are broken internally or not.
  2. Put the red plug into the terminal labeled as V, Ω, or with the sign for continuity, which looks like a sound wave. Insert the black plug into the COM terminal. Turn the dial to the picture that looks like a sound wave.[13]
    • A sound wave looks like a series of increasingly larger “)” symbols.
    • Instead of having a range of numbers in its area, the continuity option only shows 1 sound wave. Twist the dial until it’s pointing directly at the continuity sound wave to be sure it’s on the right setting.
  3. Place the black probe on 1 end of the component and the red probe on the other. Make sure that the probes are both touching the ends at the same time so the multimeter works properly.[14]
    • The component doesn’t have to be disconnected from a circuit to test for continuity.
    • It doesn’t matter which probe you put on which end of the component.
    • Examples of components you can test the continuity of are wires, switches, fuses, and conductors.
    • You have to be touching two conductive ends to test for continuity. For example, touch the probes to two bare ends of a wire.
  4. As soon as the two probes are touching the wire's ends, you should hear a beep if the wire is working well. If you don’t hear a beep, this means you have a short in the wire.[15]
    • If you have a cut or burnt wire, your wire might have a short.
    • The beep is telling you that there’s almost no resistance between the two points.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can a multimeter measure wattage?
    Jesse Kuhlman
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electric based in Massachusetts. Jesse specializes in all aspects of home and residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including "Residential Electrical Troubleshooting" which covers basic electrical troubleshooting in residential homes.
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Expert Answer
    No, that's actually one of the few things that a multimeter won't help you with. It can only measure amperage or current.
  • Question
    How do you read the amperage if my multimeter is reading voltage?
    Jesse Kuhlman
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electric based in Massachusetts. Jesse specializes in all aspects of home and residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including "Residential Electrical Troubleshooting" which covers basic electrical troubleshooting in residential homes.
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Expert Answer
    All modern multimeters have an amperage and a voltage setting. They're really easy to read, but you do typically need to switch the setting, usually by turning a dial or pressing a button.
  • Question
    How do I determine a current is grounded?
    Jesse Kuhlman
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electric based in Massachusetts. Jesse specializes in all aspects of home and residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including "Residential Electrical Troubleshooting" which covers basic electrical troubleshooting in residential homes.
    Jesse Kuhlman
    Master Electrician, Kuhlman Electric
    Expert Answer
    If you get a voltage reading of 120 volts or whatever you're normally reading between the hot and neutral, you know there is a ground there using a multimeter.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!

Warnings

  • Always hold a multimeter’s probes by the colored grips, which are insulated to protect you from shock.
  • Don’t let the probes touch when they’re both in contact with their respective parts of a circuit or you can cause a short circuit and generate sparks.
  • Never use a damaged multimeter that has cracked probe handles or frayed wires or you can get shocked.
Advertisement

Video

You Might Also Like

Restart Your Computer Using the KeyboardRestart Your Computer Using the Keyboard
Check Browsing History on a WiFi RouterCheck Browsing History on a WiFi Router
Connect PC to TV with HDMIConnect PC to TV with HDMI
Find the Publication Date of a Website3 Easy Ways to Find the Publication Date of a Website
Pair Jbl Earbuds6 Ways to Pair Your JBL Earbuds: Guide & Troubleshooting Tips
What Does DW MeanWhat Does DW Mean? Snapchat, Texting, and More
Cheat a Step Counter on a Phone10 Genius Ways to Cheat a Step Counter on a Phone (No Walking Required)
Listen to Police RadioHow to Listen to Police Radio Online: Best Apps & Websites
Read Dump FilesEasy Ways to Read Crash Dump Files & Troubleshoot Crashes
Open a Digital Safe Without a KeyOpen a Digital Safe Without a Key
Bypass Screen Time PasscodeHow to Bypass Your Screen Time Passcode: Reset, Remove, or Hack Screen Time
Guess a PasswordHow to Guess a Password
Tell if Your Mac Is Too Old to UpdateTell if Your Mac Is Too Old to Update
Change Mouse Polling RateEasy Ways to Adjust Your Mouse Polling Rate on PC & Mac
Advertisement

About This Article

Jesse Kuhlman
Co-authored by:
Master Electrician, Kuhlman Electric
This article was co-authored by Jesse Kuhlman. Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electric based in Massachusetts. Jesse specializes in all aspects of home and residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including "Residential Electrical Troubleshooting" which covers basic electrical troubleshooting in residential homes. This article has been viewed 542,941 times.
How helpful is this?
Co-authors: 33
Updated: August 17, 2023
Views: 542,941
Article SummaryX

To use a digital multimeter to measure voltage, start by putting the black probe in the common terminal and the red probe in the terminal that's marked for measuring volts. Then, set the multimeter to the kind of voltage you're measuring if it doesn't have an auto-range function. If you're measuring AC voltage, place the probes across the component. If you're measuring DC voltage or millivoltage, you'll need to place the black probe on the negative side of the component and the red probe on the positive side. Finally, check the display on the multimeter to see the voltage. To learn how to measure current and resistance using a digital multimeter, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 542,941 times.

Reader Success Stories

  • Tuhin Mridha

    Tuhin Mridha

    Mar 28, 2016

    "Really I understand that's how to check whether it's good or bad. I'm thankful for wikiHow."
Share your story

Is this article up to date?

Advertisement